The printing process

Pre-printing refers to the work in the early stage of printing, generally referring to photography, design, production, typesetting, output of film proofing, etc.

The process of printing a finished product through a printing press.

After printing - refers to the printing of the late work, generally refers to the finishing of the print (coated), including UV, oil, beer, hot stamping, hit convex, mounts, bookbinding, cutting, etc., used for publicity and packaging printing.

Brush classification

Office: refers to stationery, envelopes, office forms, etc.

Publicity: refers to a series of printed materials related to corporate publicity or product publicity, such as posters, leaflets and product manuals.

Production: refers to the packaging box, adhesive label and other large quantities of products directly related to the production of printed matter.

Brush plate material classification.

1. Ps version: suitable for printing with color or monochrome, suitable for machine printing. The general edition is available for continuation printing, the quality of printing is very precise, almost perfect.

2. Resin version: for example, business card machine and disk machine are suitable for a small number of business CARDS, store CARDS, invitation CARDS and stickers.

Zinco: such as business card machine, disc machine, bronzing machine, special use in hot stamping, belling (using), the quality is good, otherwise lithography in this plate (for the first domestic lithographic plate).

4. Paper version: it is suitable for fast printing press, etc. This edition is hard to save because it is hard to keep.

5. Screen version: suitable for screen printing press, etc. This edition is suitable for some special materials, such as PVC, clothes, etc.

6. Aluminum version: it is suitable for printing press, but due to its low printing capacity and high proportion of poor printing, it has fewer users.

It is often used in Indian brush.

1. White/white: when printing paper is mostly white, printing or plate making, the color of the connection is not close enough to reveal the background color of white paper.

2. Whitening: the photographic process of the Internet era. Dark a underexposed to remedy the Internet picture, can remove the original flash once or put a piece of paper to fill some exposure, or directly use flash light, flashing light, to increase the depth of the original network, make the image diffusion.

3. Fattening: "gluttons" of course will be "fat", and the film will have more grain, and the light will expand the site. The manual version is more in the sensitive film and transparent thick film to expose the fat.

4. Bare white (Colortrapping) : color separation plate making to make color transition expansion blasting fat, reduce the influence of misregister.

5. Field: refers to the color block area without a dot, usually full version.

6. Anti-white: the text or line is printed in Yin print, showing white paper.

7. Net: am net color separation process, distribution network Angle error, or each net angular distance is less than 25 °, turtle grain began to Ming

8. Fly net: the screen printing process, after the normal exposure, take off the net, supplement the short exposure to increase the contrast.

Dog teeth: the dog's "teeth" are concave and convex. The image is not enough pixels, and the "dog tooth" appears on the edge.

Rose: like a deer's mesh. The difference is called the mat, the worse is the turtle pattern.

11. Qi head: the layout of the layout of the instructions, the first line of the word. Extended to imposition, binding, refers to the version of the head position as the benchmark.

Loose ends: a type of text typesetting. Only the word space is unified, not the end of the text neat.

13. Mask: it is a mask for manual separations, which can be used either in film or in red film.

Blue version: not "basketball", not RGB B(blue), but CMYK C(blue).

With order

1. Bleeding: the printing and binding process requires the site color or image of the page to be cut across the line 3mm, which is called bleeding.

2. Flying: "flying", cutting and removing the meaning. It is a binding term for the removal of bleeding edge.

3. Chamfer: deformation, cut and skew, right Angle change the Angle book, more than the paper brake pressure uneven or the paper grid is not leading.

4. Polishing: the printing plate is processed with calender roller, and the surface will be smooth, which is the process of surface treatment.

5. Anti-handcuffs: origami of Japanese folding machine. The 32 version of the folding must be folded back.

6. Legitimate version: the first yard of the book is called the legitimate version, and the second code is called the anti-version, and the anti-version is called a group, a post or a box.

Paper brake: it is not the door to close the paper, it is the machine for cutting paper.

A method of binding a book, such as a horse's back. After the book (6 posts below) is set, straddle on the iron frame to put on the iron wire nail.

9. Pork sausage roll: a method of folding a book, such as a roll of intestinal powder, and a 32 version of the lower shuttle with 3 shuttles.

10. The wind Yue (" month ") : a method of folding book. The book folded away like a screen.

11. Anti-cover: a method of binding the cover by hand, first the adhesive on the back cover, then the cover side of the spine, and then make an "anti-" cover.

12. MAO shu: it is not a book with long hair, but a blank book that has not been cut on the cover.

13. Benedict: a piece of cloth attached to the top of a hardcover spine. It has a strong and beautiful effect.

14. Seal: a processing action such as a bronzing and high humidity on the cover of the hardcover.